Skip to content

Rail positions: what "rail out 3 m" means

What a true rail and a rail out mean, how to read a rail position such as "+4 m 1200-400", and how a rail move can change how a race is run.

The running rail

The running rail is the inside fence of the course. It does not stay in one position. Race clubs move it in and out between meetings, to spread the wear on the turf. Stewards can also move it on race day if a part of the inside is not safe.

Most of the racing occurs on the grass near the rail. When the club moves the rail out, the rail covers this worn strip, and the grass can recover. The field then races on ground that has had less use.

Each meeting has a published rail position. The club usually gives it with the track condition. On a speed map, the rail position is at the top of the race page.

How to read a rail position

True means that the rail is in its innermost position. The course has its full width.

A figure such as "out 3 m" or "+3 m" means that the rail is 3 metres out from the true position. For example, "+3 m Entire Circuit" means that the rail is 3 metres out for the full circuit.

The rail can also be out for only a part of the track. "+4 m 1200-400" means that the rail is 4 metres out from the 1200 metre mark to the 400 metre mark. These distances are measured back from the finishing post. The notice also gives the rail position for the remainder of the circuit. Often it is "True Remainder", but the rail can also stay out, for example "+8 m Remainder".

New ground near the fence

When the rail moves out, the runners on the fence race on ground that had less wear. For this reason, people often think that a rail move helps the runners near the inside.

This is a tendency, not a rule. After heavy rain, the ground near the rail can be bad at any rail position. Some tracks also drain or become dry unevenly.

Thus the rail is only a start point to read the bias. The first races of the day give the decision. The guide to track bias and lanes tells you how the map records this.

A narrower track

Each metre that the rail moves out is a metre of track that the field cannot use. When the rail is far out, the course is narrower, and a large field has less space on the turns.

A runner three or four wide is nearer to the outside fence than on a true rail. Runners with wide barriers can find it harder to get to the fence.

The shape of the turns also changes. When the rail moves out, the turns become a little wider. Thus the trip around the rail is a little longer than with a true rail. In some states, the club changes the official race distance to show this.

How the map shows the rail

When the rail is out for the full circuit, the 3D view shows the rail at that position. The inside runners are against the rail in its real position for the day, and the field is across the narrower track.

On the board, "on the fence" always means against the rail for that meeting, not the true position.

The rail also helps you read the race. Some rail positions can cause a note on the map. Examples are a rail out after a wet week, a true rail on a firm track, or a new rail move. The note can say that the inside is better, or that riders avoid it.

Before you read the settling positions, examine the rail, the track condition and any stewards' notices together.